In short
- Conventional units (e.g. mg/dl) and SI units (e.g. mmol/l) describe the same thing – just counted differently.
- The conversion factor depends on the molecular mass, so every lab value has its own.
- Always compare a value with the reference range in the same unit.
- Lab values
- 26
- Directions
- both
- Basis
- molecular mass
Why there are two unit systems
Labs can report how much a substance weighs (mass per volume, such as milligrams per decilitre) or how many particles of it are in the blood (amount of substance per volume, such as millimoles per litre). The latter is the International System of Units (SI). The US mostly uses conventional units, while the UK, Canada and Australia use SI units; German-speaking countries mix both.
Because every molecule has a different weight, every lab value needs its own factor. A glucose of 100 mg/dl equals 5.55 mmol/l, while a cholesterol of 200 mg/dl equals 5.17 mmol/l.
All conversion factors
Multiply to convert from conventional to SI units, divide to go the other way.
| Lab value | conventional | SI | factor |
|---|---|---|---|
| Glucose | mg/dl | mmol/l | × 0.0555 |
| Cholesterol (total, LDL, HDL) | mg/dl | mmol/l | × 0.02586 |
| Triglycerides | mg/dl | mmol/l | × 0.01129 |
| Creatinine | mg/dl | µmol/l | × 88.42 |
| Urea | mg/dl | mmol/l | × 0.1665 |
| Blood urea nitrogen (BUN) | mg/dl | mmol/l | × 0.357 |
| Uric acid | mg/dl | µmol/l | × 59.48 |
| Bilirubin | mg/dl | µmol/l | × 17.1 |
| Calcium | mg/dl | mmol/l | × 0.2495 |
| Magnesium | mg/dl | mmol/l | × 0.4114 |
| Phosphate | mg/dl | mmol/l | × 0.3229 |
| Iron | µg/dl | µmol/l | × 0.1791 |
| Ferritin | ng/ml | µg/l | × 1 |
| Vitamin D (25-OH) | ng/ml | nmol/l | × 2.496 |
| Vitamin B12 | pg/ml | pmol/l | × 0.7378 |
| Folate | ng/ml | nmol/l | × 2.266 |
| Testosterone | ng/dl | nmol/l | × 0.03467 |
| Estradiol | pg/ml | pmol/l | × 3.671 |
| Cortisol | µg/dl | nmol/l | × 27.59 |
| Insulin | µU/ml | pmol/l | × 6.0 |
| fT4 | ng/dl | pmol/l | × 12.87 |
| fT3 | pg/ml | pmol/l | × 1.536 |
| Haemoglobin | g/dl | g/l | × 10 |
| Albumin | g/dl | g/l | × 10 |
| CRP | mg/dl | mg/l | × 10 |
| HbA1c | % | mmol/mol | (% − 2.15) × 10.929 |
Three tips for your report
- Read the unit first: 5.5 can be a perfectly normal glucose in mmol/l – in mg/dl it would be impossibly low.
- Convert the reference range too: if you convert a value, convert its limits as well, otherwise you compare apples and oranges.
- Track trends at the same lab: different methods can differ slightly even with the same unit.
HbA1c is not converted by a simple factor but by its own equation – use the HbA1c calculator for that.
Your values over time, not a one-off report
Add lab results by photo, PDF or by hand. BeBetr shows reference ranges, trends and links to your nutrition and protocol.
Frequently asked questions
How do I convert blood glucose from mg/dl to mmol/l?
Divide by 18 (more precisely 18.016) or multiply by 0.0555. 100 mg/dl is about 5.6 mmol/l.
Why does cholesterol have a different factor than glucose?
Because a cholesterol molecule is much heavier than a glucose molecule. The factor comes from the molecular mass.
Is ferritin in ng/ml the same as in µg/l?
Yes. Nanograms per millilitre and micrograms per litre are numerically identical.
Sources
- Young DS: Implementation of SI units for clinical laboratory data. Style specifications and conversion tables. Ann Intern Med 1987
- Austrian public health portal: lab values (German)
- NGSP: HbA1c conversion (IFCC)
Written by the BeBetr editorial team with AI assistance; facts checked against the sources listed (as of Nov 21, 2026). This content is for information only and does not replace medical advice, diagnosis or treatment.
BeBetr